Applied and Computational Engineering

- The Open Access Proceedings Series for Conferences


Proceedings of the 4th International Conference on Materials Chemistry and Environmental Engineering

Series Vol. 63 , 09 May 2024


Open Access | Article

Review on preheating systems for Lithium-ion batteries of electric vehicles under low temperature circumstance

Yansen Li * 1
1 Chang’an University

* Author to whom correspondence should be addressed.

Applied and Computational Engineering, Vol. 63, 131-136
Published 09 May 2024. © 09 May 2024 The Author(s). Published by EWA Publishing
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Citation Yansen Li. Review on preheating systems for Lithium-ion batteries of electric vehicles under low temperature circumstance. ACE (2024) Vol. 63: 131-136. DOI: 10.54254/2755-2721/63/20241006.

Abstract

Nowadays, energy and environmental protection issues have become the focus of most attention. The development of electric vehicles which depends on lithium ion battery as power source is one of the most applicable way in dealing with these issues. Lithium-ion battery (LIB) is highly favoured for its outstanding features in energy density, cycle life and energy retention. However, its severe sensitivity to working temperatures leads to problems when driving electric vehicles. Therefore, researchers and engineers have explored approaches to guaranteeing a suitable working temperature for LIB, one of which is the battery preheating system. To clarify the advancement of this system, both internal and external preheating methods studied in recent years are summarized, and the discussion for future research is included.

Keywords

preheating, lithium-ion battery, electric vehicle, low temperature

References

1. Jaguemont, J., Boulon, L., & Dubé, Y. (2016). A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures. In Applied Energy (Vol. 164, pp. 99–114). Elsevier Ltd. https://doi.org/10.1016/j.apenergy.2015.11.034

2. Zhang, X., Li, Z., Luo, L., Fan, Y., & Du, Z. (2022). A review on thermal management of lithium-ion batteries for electric vehicles. Energy, 238. https://doi.org/10.1016/j.energy.2021.121652

3. Cheng, G., Wang, Z., Wang, X., & He, Y. (2022). All-climate thermal management structure for batteries based on expanded graphite/polymer composite phase change material with a high thermal and electrical conductivity. Applied Energy, 322. https://doi.org/10.1016/ j.apenergy.2022.119509

4. Wang, H., Liu, J., Zhao, W., Zhu, Y., Hu, B., Fu, Y., & Tao, Z. (2020). Model of Battery Capacity Attenuation at Low Temperature. IOP Conference Series: Earth and Environmental Science, 565(1). https://doi.org/10.1088/1755-1315/565/1/012016

5. Wang, Y., Zhang, X., & Chen, Z. (2022). Low temperature preheating techniques for Lithium-ion batteries: Recent advances and future challenges. Applied Energy, 313. https://doi.org/10.1016/j.apenergy.2022.118832

6. Zhang, Z., Yu, W., Li, H., Wan, W., Zhang, W., Zhuo, W., & Liu, Q. (2023). Heat transfer characteristics and low-temperature performance of a lithium-ion battery with an inner cooling/heating structure. Applied Thermal Engineering, 219. https://doi.org/10.1016/ j.applthermaleng.2022.119352

7. Shang, Y., Chen, G., Peng, Q., Zhu, T., & Liu, K. (2023). An intelligent preheating approach based on high-gain control for lithium-ion batteries in extremely cold environment. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/TIE.2023.3288181

8. Du, X., Zhao, L., Yang, Z., & Jin, Z. (2023). A closed-loop control on temperature difference of a lithium-ion battery by pulse heating in cold climates. Journal of Energy Storage, 57. https://doi.org/10.1016/j.est.2022.106311

9. Luo, M., Lin, X., Feng, J., Ling, Z., Zhang, Z., & Fang, X. (2023). Fast self-preheating system and energy conversion model for lithium-ion batteries under low-temperature conditions. Journal of Power Sources, 565. https://doi.org/10.1016/j.jpowsour.2023.232897

10. Lin, C., Kong, W., Tian, Y., Mao, Y., Zhou, E., Shao, Q., Wu, N., Liu, J., Yu, X., & Huang, S. (2023). Sandwich self-heating structure-based lithium-ion battery system and its application in the fuel cell bus for Beijing Winter Olympic Games. Energy Conversion and Management, 284. https://doi.org/10.1016/j.enconman.2023.116977

11. Ji, Y., & Wang, C. Y. (2013). Heating strategies for Li-ion batteries operated from subzero temperatures. Electrochimica Acta, 107, 664–674. https://doi.org/10.1016/j.electacta. 2013.03.147

12. Liu, Z., Liu, X., Meng, H., Guo, L., & Zhang, Z. (2021). Numerical analysis of the thermal performance of a liquid cooling battery module based on the gradient ratio flow velocity and gradient increment tube diameter. International Journal of Heat and Mass Transfer, 175. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121338

13. Wang, Y., Rao, Z., Liu, S., Li, X., Li, H., & Xiong, R. (2021). Evaluating the performance of liquid immersing preheating system for Lithium-ion battery pack. Applied Thermal Engineering, 190. https://doi.org/10.1016/j.applthermaleng.2021.116811

14. Al Hallaj S, Selman J. A novel thermal management system for electric vehicle batteries using phase-change material. J Electrochem Soc 2000;147(9):3231. http://dx.doi.org/10.1002/chin.200101020.

15. Ling Z, Wen X, Zhang Z, Fang X, Xu T. Warming-up effects of phase change materials on lithium-ion batteries operated at low temperatures. Energy Technol 2016;4(9):1071–6. http://dx.doi.org/10.1002/ente.201600083.

16. Ling, Z., Luo, M., Song, J., Zhang, W., Zhang, Z., & Fang, X. (2021). A fast-heat battery system using the heat released from detonated supercooled phase change materials. Energy, 219. https://doi.org/10.1016/j.energy.2020.119496

Data Availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Authors who publish this series agree to the following terms:

1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this series.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this series.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See Open Access Instruction).

Volume Title
Proceedings of the 4th International Conference on Materials Chemistry and Environmental Engineering
ISBN (Print)
978-1-83558-417-0
ISBN (Online)
978-1-83558-418-7
Published Date
09 May 2024
Series
Applied and Computational Engineering
ISSN (Print)
2755-2721
ISSN (Online)
2755-273X
DOI
10.54254/2755-2721/63/20241006
Copyright
09 May 2024
Open Access
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

Copyright © 2023 EWA Publishing. Unless Otherwise Stated