Applied and Computational Engineering

- The Open Access Proceedings Series for Conferences


Proceedings of the 4th International Conference on Materials Chemistry and Environmental Engineering

Series Vol. 63 , 09 May 2024


Open Access | Article

Mechanistic study on the role of 3D-Printed biomimetic coral bone scaffolds in bone defect repair

Zeyu Liu 1 , Wenjie Dong 2 , Zihao Shi 3 , Jie Pei 4 , Tengfei Ma 5 , Kun Fu * 6
1 First Affiliated Hospital of Hainan Medical University
2 Hainan Medical University
3 Hainan Medical University
4 First Affiliated Hospital of Hainan Medical University
5 First Affiliated Hospital of Hainan Medical University
6 First Affiliated Hospital of Hainan Medical University

* Author to whom correspondence should be addressed.

Applied and Computational Engineering, Vol. 63, 62-67
Published 09 May 2024. © 09 May 2024 The Author(s). Published by EWA Publishing
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Citation Zeyu Liu, Wenjie Dong, Zihao Shi, Jie Pei, Tengfei Ma, Kun Fu. Mechanistic study on the role of 3D-Printed biomimetic coral bone scaffolds in bone defect repair. ACE (2024) Vol. 63: 62-67. DOI: 10.54254/2755-2721/63/20240995.

Abstract

With the continuous innovation and development of 3D printing technology, 3D-printed biomimetic coral bone scaffolds have demonstrated significant potential in the field of bone defect repair. This paper aims to explore in-depth the mechanistic study of 3D-printed biomimetic coral bone scaffolds in bone defect repair, by systematically reviewing relevant literature and analyzing their potential mechanisms in promoting bone growth and improving the success rate of bone defect repair. Firstly, this paper introduces the fabrication process and material characteristics of 3D-printed biomimetic coral bone scaffolds. Secondly, the paper discusses the mechanisms of 3D-printed biomimetic coral bone scaffolds in terms of biocompatibility, biomechanical performance, as well as their roles in vascularization and bone formation. Finally, the paper outlines future research directions for 3D-printed biomimetic coral bone scaffolds, including further optimization of material properties, improvement of printing precision, and expansion of clinical applications.

Keywords

3D printing, biomimetic coral bone scaffolds, bone defect repair, bone formation mechanisms

References

1. Yang Y, Chu L, Yang S, et al. Dual-functional 3D-printed composite scaffold for inhibiting bacterial infection and promoting bone regeneration in infected bone defect models[J]. Acta biomaterialia, 2018, 79: 265-275.

2. Huang W, Shan Q, Wu Z, et al. Retrievable covered metallic segmented Y airway stent for gastrorespiratory fistula of carina or main bronchi[J]. The Journal of Thoracic and Cardiovascular Surgery, 2021, 161(5): 1664-1671. e2.

3. Dutta S D, Hexiu J, Patel D K, et al. 3D-printed bioactive and biodegradable hydrogel scaffolds of alginate/gelatin/cellulose nanocrystals for tissue engineering[J]. International Journal of Biological Macromolecules, 2021, 167: 644-658.

4. Liu Y, Ma Y, Zhang J, et al. MBG-modified β-TCP scaffold promotes mesenchymal stem cells adhesion and osteogenic differentiation via a FAK/MAPK signaling pathway[J]. ACS applied materials & interfaces, 2017, 9(36): 30283-30296.

5. Ryan E J, Ryan A J, González-Vázquez A, et al. Collagen scaffolds functionalised with copper-eluting bioactive glass reduce infection and enhance osteogenesis and angiogenesis both in vitro and in vivo[J]. Biomaterials, 2019, 197: 405-416.

6. Niu H, Ma Y, Wu G, et al. Multicellularity-interweaved bone regeneration of BMP-2-loaded scaffold with orchestrated kinetics of resorption and osteogenesis[J]. Biomaterials, 2019, 216: 119216.

7. Wang M, Li H, Yang Y, et al. A 3D-bioprinted scaffold with doxycycline-controlled BMP2-expressing cells for inducing bone regeneration and inhibiting bacterial infection[J]. Bioactive Materials, 2021, 6(5): 1318-1329.

8. Hasan A, Waibhaw G, Saxena V, et al. Nano-biocomposite scaffolds of chitosan, carboxymethyl cellulose and silver nanoparticle modified cellulose nanowhiskers for bone tissue engineering applications[J]. International journal of biological macromolecules, 2018, 111: 923-934.

9. Wang H, Deng Z, Chen J, et al. A novel vehicle-like drug delivery 3D printing scaffold and its applications for a rat femoral bone repairing in vitro and in vivo[J]. International journal of biological sciences, 2020, 16(11): 1821.

10. Dang M, Koh A J, ** X, et al. Local pulsatile PTH delivery regenerates bone defects via enhanced bone remodeling in a cell-free scaffold[J]. Biomaterials, 2017, 114: 1-9.

11. Kolanthai E, Sindu P A, Khajuria D K, et al. Graphene oxide—a tool for the preparation of chemically crosslinking free alginate–chitosan–collagen scaffolds for bone tissue engineering[J]. ACS applied materials & interfaces, 2018, 10(15): 12441-12452.

12. Pan S, Yin J, Yu L, et al. 2D MXene‐integrated 3D‐printing scaffolds for augmented osteosarcoma phototherapy and accelerated tissue reconstruction[J]. Advanced Science, 2020, 7(2): 1901511.

13. Zhang Q, Ma L, Ji X, et al. High‐strength hydroxyapatite scaffolds with minimal surface macrostructures for load‐bearing bone regeneration[J]. Advanced Functional Materials, 2022, 32(33): 2204182.

14. Tang W, Lin D, Yu Y, et al. Bioinspired trimodal macro/micro/nano-porous scaffolds loading rhBMP-2 for complete regeneration of critical size bone defect[J]. Acta biomaterialia, 2016, 32: 309-323.

15. Hasan A, Waibhaw G, Saxena V, et al. Nano-biocomposite scaffolds of chitosan, carboxymethyl cellulose and silver nanoparticle modified cellulose nanowhiskers for bone tissue engineering applications[J]. International journal of biological macromolecules, 2018, 111: 923-934.

16. Figueiredo L, Pace R, d'Arros C, et al. Assessing glucose and oxygen diffusion in hydrogels for the rational design of 3D stem cell scaffolds in regenerative medicine[J]. Journal of tissue engineering and regenerative medicine, 2018, 12(5): 1238-1246.

17. Yang S, Li X, Liu P, et al. Multifunctional chitosan/polycaprolactone nanofiber scaffolds with varied dual-drug release for wound-healing applications[J]. ACS Biomaterials Science & Engineering, 2020, 6(8): 4666-4676.

18. Wang L, Li D, Huang Y, et al. Bionic Mineralized 3D‐Printed Scaffolds with Enhanced In Situ Mineralization for Cranial Bone Regeneration[J]. Advanced Functional Materials, 2023: 2309042.

Data Availability

The datasets used and/or analyzed during the current study will be available from the authors upon reasonable request.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. Authors who publish this series agree to the following terms:

1. Authors retain copyright and grant the series right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this series.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the series's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this series.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See Open Access Instruction).

Volume Title
Proceedings of the 4th International Conference on Materials Chemistry and Environmental Engineering
ISBN (Print)
978-1-83558-417-0
ISBN (Online)
978-1-83558-418-7
Published Date
09 May 2024
Series
Applied and Computational Engineering
ISSN (Print)
2755-2721
ISSN (Online)
2755-273X
DOI
10.54254/2755-2721/63/20240995
Copyright
09 May 2024
Open Access
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited

Copyright © 2023 EWA Publishing. Unless Otherwise Stated